36
1.
If the DHCP server is available, you can check to automatically obtain
an IP address and
other network settings from that server.
2.
The valid value range of Maximum Transmission Unit (MTU) is 500 ~ 9676.
3.
The Multicast sends a stream to the multicast group address and allows multiple clients to
acquire the stream at the same time by requesting a copy from the multicast group address.
4.
Before utilizing this function, you have to enable the Multicast function of your
router and
configure the gateway of the network.
5.
If the DNS server settings are required for some applications (e.g., sending email), you
should properly configure the Preferred DNS Server and Alternate DNS server.
6.
The router must support the route advertisement function if you select Route Advertisement
as the IPv6 mode.
PPPoE:
If you have no router but only a modem, you can use Point
-to-Point Protocol over
Ethernet (PPPoE) function
. Click this button to enable the PPPoE function,
Select this option to configure your Network Camera to make it accessible from anywhere as long
as there is an Internet connection
Note
that to utilize this feature, it requires an account provided by your
ISP.
