43
Clear:
Click Clear to delete all detection regions
Detection Area:
To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
Detection Type:
There are “Target Entry”, “Target Lave”, “ Target Enter/Leave” and “Target Loiter”
modes, and choose one for the detection type.
Object Percent:
Setup the minimum percentage ration (target size/ image area) of effective
counting targets. Once the targets ration is smaller than the setting value, the system will ignore the
target which passing through the trigger line.
Time:
Set the upper limit value for the Target leave or enter or stay period, the alarm will be
triggered automatically when the value is more than the setting.
Email:
Check “Email” and once the event triggers that it will send Email to setting email address.
Alarm Output:
Check “Alarm output” and once the event triggers, the camera will linkage to alarm
output.
PTZ:
Check “PTZ” and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
Preset:
Setup the Preset point for the PTZ camera move to when the event is triggered.
Save:
Click “
Save”
icon to store the setting.
Содержание ANYCAM IR-2MIPM03 Series
Страница 12: ...12 1 4 Product Dimension...
