44
WDR:
There are Off/ Low/ Mid/ High modes selectable. The default setting is off.
3DNR:
There are Low/ Mid/ Mid High/High modes selectable. The default setting is Low.
Sharpness:
Setup the sharpness of video color, the high value will get more sharpness color.
Defogging:
On/ Off selectable, the default setting is Close.
Slow shutter:
On/ Off selectable, the default setting is Close.
White Balance:
Auto /Customer and the other presetting mode for suit for the application
environment. .
Exposure Control:
Exposure mode is includes Auto/Manual mode.
AE algorithms:
There are 2kinds (Sutter First and Gain First) preset modes for the user
selection.
Sutter First:
Enable the Sutter First mode that is Fix shutter and you can select the AGC (Auto
gain control) value. High AGC value will get the bright image, but the video noise will be
increasing.
Gain First:
Enable the Gain First mode and you can select the Sutter value from 1/1s ~
1/100,000s. And AGC will become to auto mode. Select the shutter value for the
application.
Aperture:
IRIS:
Select the Manual/DC-IRIS/P-IRIS mode, it should be matched the IRIS of Lens type.
Lens:
Select the Manual/Semiautomatic mode, it should be matched the Lens type which can
support the auto focus.
Gamma:
Gamma:
Select the value to suit for the environment application.
Power Frequency:
There are 2 kind frequencies on the power system and it will cause the line
scrolling on the video if the frequency does not match. Select the correct power
frequency to match the used power system.
Light Board Control:
Model:
There are Auto/Manual/Off modes to control the IR LED.
Auto:
Select the Auto mode, the IE LED will adjust the optimum status when viewing the
object automatically.
Manual:
Select the Manual mode; you can adjust the bright of LED by manually.
Содержание ANYCAM DM-2MIPA 04 Series
Страница 23: ...23...
