16 Channel Embedded Digital Video Recorder User Manual
25
www.i-tesco.co.uk
Picture 4-32
4.7.7 Display Setup
Click "Main Menu"
→ "Display Setup" to enter Display Setup menu interface as shown in Picture
4-33
The display setup interface mainly indicates: Main display switching interval (Main Interval), SPOT
switching interval(Spot Interval),video loss ignore(Camera Loss),display resolution.
(1) Main display switching interval (Main Interval) is referred as the setup of the interval between the
switching of the main displaying screen.
Setting Method:
press the Arrow Keys to select main display switching interval (Main Interval) column,
press PTZ key to pop up the drop-down menu, finally, press the PTZ key to apply the selected intervals.
The optional numerical value indicates (1/2/3/5 second etc. ), the default value is 2 seconds.
(2) SPOT Switching Interval (Spot Interval) is referred as setup of the interval between the switching of
the SPOT displaying screen.
Setting Method :
Press the Arrow Keys to select SPOT switching interval(Spot Interval) column, press PTZ key to
pop up the drop -down menu, press the Arrow Keys to select the intervals, then press PTZ key to apply
the selected intervals. The optional numerical value indicates (1/2/3/5 second etc. ), the default value is
2 seconds.
(3) Video Loss Ignoring
（
Camera Loss
）
is referred as the skipping of the channel without video signal
input.
Setting Method :
Press the Arrow keys to select video loss ignoring
（
Camera Loss
）
column, then
press PTZ key to pop up the drop-down menu, press the arrow key to select on/off, press PTZ key to
apply the selected settings. If the setting is on, then the channel without video input will be skipped.
While the setting is off, all the channels will be displayed whether any video input or not.
(3) Display Resolution: the resolution setup of VGA or HDMI output port
NOTE: the VGA and HDMI can not output at the same time.
Setting Method :
Press the Arrow Keys to select display resolution(Resolution) column, press PTZ key
to pop up the drop -down menu, press the Arrow Keys to select the video output resolution, then press
PTZ key to apply the selected settings.
