i-Tech Company, LLC www.i-techcompany.com
17
Try a different keyboard, but use only 101, 102 or 104-key keyboard.
7. The Mouse is not detected during PC boot up.
Make sure the mouse works when directly plugged into the computer.
Make sure the mouse is a true PS/2 mouse. A combo mouse will work just as long as it
is set for PS/2 mode with the correct adapter. Try a different mouse.
Avoiding moving the mouse or pressing the mouse buttons when switching ports.
Avoiding switching ports during shutting down the PC process.
When you switch one PC port to another PC port, the best scan time setting need to be
set to 5 sec. or more. Normally, the VGA monitor change one resolution mode to
another will take one or two seconds. So, the scan time is not recommended to below
5 seconds.
8. The power switch is off, but the switch still works fine or power adapter is unplugged
from the switch, but the switch still works fine.
KVM Switch unit draws the power source from power adapter and all PC’s PS2 port.
Some PC’s PS2 port can support enough power for the switch, but some PC’s PS2
port (like laptop, notebook computer…etc.) is unable to supply enough power for the
switch. In order to make sure the system can work steadily, please do not set power
switch to off state or remove the power adapter from the switch.
Although the PCs connected to KVM Switch unit are able to support enough power to
the stand alone switch, KVM Switch unit still needs a power adapter for daisy chain
more banks.
9. If forgetting the “ password ” you typed, please contact your supplier.
Accessories
HDDB15 Male to DB15 Male + Mini Din*2
CDB-6-PS2---
PS/2
CDB-6-PS2-USB
--- USB+PS/2
Ordering information:
xxx = 180:180cm cable
300:300cm cable
500:500cm cable
1000:10M cable
1500:15M cable
2000:20M cable
3000:30M cable
