![I-Tech UE Скачать руководство пользователя страница 43](http://html1.mh-extra.com/html/i-tech/ue/ue_user-manual_3137412043.webp)
IACER Srl
43
MNPG118-02
11.
In the S programs display shows the phases total
number and the number of the phase you want to
set the parameters: press
B3-B7
buttons and the
knob
(3) to select programs parameters
(contraction, recovery, width impulse, frequency,
etc.) for each phase (please see the following
instructions regarding each parameter). Press the
knob to confirm the value for each phase.
12.
Select CONSTANT CURRENT (CC) or CONSTANT
VOLTAGE (CV) by pressing again
PROGRAM
CC/CV
button. The unity of measurement
changes from mA (milliAmpere) to V (Volts).
13.
Select the waveform features by pressing B3-B7
buttons (each waveform has different technical features):
•
B3: select frequency modulation/vector/Burst/
•
B4: select frequency/carrier frequency
•
B5: select duty cycle/high frequency/width modulation
•
B6: select low frequency/impulse duration
•
B7: select therapy time/contraction-recovery cycle / slope
Press the button of the selected parameter and regulate the value by
using the knob (3).
14.
Press
FREQ. DUTY
(
B8
) button and select the working frequency (1 or 3
MHz) by using the
knob
(3).
15.
Press
B8
button to regulate the duty cycle: it’s possible to select the value
from 10% to 100% (stepping of 10) by using the
knob
(3).
16.
Press
B7
button to select therapy time: it’s possible to select therapy time
from 1 to 30 minutes (stepping of 1) by using the
knob
(3).
17.
Put a good quantity of conductive gel on the area to be treated. It is
recommended to use a CE conductive gel.
18.
Select electrotherapy intensity by using the
knob
(2) of the Channel (2).
19.
Select treatment intensity by using the
knob
(8). Press the
knob
(3) to
select the unity of measurement W (Watt) or W/cm² (Watt/ cmq).
20.
Keep the head in constant contact with the skin and make sure that the
part is covered in gel so that the therapy is effective. The green LED located
next to the head on the handpiece lights up when the device is working.
Move the handpiece at a distance of 10/15cm from pre-gelled electrode.
21.
The device has a head/skin coupling system for
safety reasons. If the contact is not correct and
if the intensity is set above 0,5W, the LED on the
Содержание UE
