I-Tech ORTHOMAG, Руководство пользователя

Страница: 13 / 28

I.A.C.E.R. Srl 13 MNPG207-02
WARNING: connect the charger to the power supply when connected to
the device . Do not leave the charger connected to the mains 230V but
disconnect it after each use .
WARNING: during therapy, you may hear a slight hum coming from the
device : it is a normal noise and should not cause concern .
The functionality of some implantable electrical devices , such as
pacemakers , may be affected during treatment with shortwave devices .
Consult your doctor before using the device .
No significant side effects are known of, nor are reported particular
contraindications for excessive time length using the device.
How to use the device
Insert the battery in the rear compartment of Orthomag.
Therapeutic indications (average time of therapy 2 hours per day).
The pre-set program lasts up to 4 hours (then the device switches off).
When using the device with battery, the program duration is guaranteed
up to 3 hours.
How to use the device with the power supply adapter
Connect the applicator to the Orthomag.
Place the applicator onto the part of the body to be treated (see
picture at page 16) and fix it with the elastic strap supplied.
Connect the power supply adapter to Orthomag (the POWER
LED starts blinking green).
Switch on the Orthomag by pressing the middle button.
Choose the program L (50 Hz) or H (75 Hz) by pressing the L
button or the H button, respectively.
When the program L starts, the OUTPUT LED flashes green.
When the program H starts, the OUTPUT LED flashes red.
How to use the device with battery
Before proceeding, ensure that the device was previously
charged at full capacity (at least 4/5 hours).
Connect the applicator to the Orthomag.
Place the applicator onto the part of the body to be treated (see
picture below) and fix it with the elastic strap supplied.
Switch on the Orthomag by pressing the middle button.