I-Tech I-PRESS 4, Руководство пользователя

Страница: 21 / 28

IACER SRL Page 21 MNPG219-00 25/03/16
EMC Tables
Guidance and MANUFACTURER’S declaration – ELECTROMAGNETIC EMISSIONS
– FOR ALL THE EQUIPMENT AND THE SYSTEMS
I-PRESS S 4 is intended for use in the electromagnetic environment specified below.
The customer or the user of the I-PRESS 4 should assure that it is used in such an
environment.
Emission test Compliance Electromagnetic environment –
guidance
RF emissions
Cispr 11
Group 1
I-PRESS 4 uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment
RF emissions
Cispr 11
Class B I-PRESS 4 is suitable for use in all
establishments,
including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2 Class A
Complies
The I-PRESS 4 is suitable for use in all
establishments, other than domestic
establishments
and those directly
connected to the public low voltage
power supply network that supplies
buildings used for domestic purposes
Voltage fluctuations/
flicker emissions
IEC 61000-3-3 Complies
Guidance and MANUFACTURER’S declaration – ELECTROMAGNETIC IMMUNITY
– FOR ALL THE EQUIPMENT AND THE SYSTEMS
I-PRESS 4 is intended for use in the electromagnetic environment specified below.
The customer or the user of I-PRESS 4 should assure that is used in such
environment.
Immunity test
Test level EN
60601-1-2
Compliance level Electromagnetic
environment
–
guidance
Electrostatic
discharge (ESD)
EN 61000-4-2
±
6kV contact
±
8kV air
±
6kV contact
±
8kV air
Floors should be
wood, concrete or
ceramic tile. If floor
are covered with
synthetic
material,
the relative humidity
should be at least
30%