Talk & Standby Time
A fully charged battery can offer up to 6 hours of talk time and up to 120 hours of standby
time. The headset remains in standby mode after being turned on.
5
6
Pairing Your Headset with a Bluetooth Mobile Phone
Using your Headset
1) Ensure the headset is off.
2) To activate the pairing mode, press and hold the headset’s MFB for 8 seconds without
releasing your finger until its status indicator flashes blue and red light alternately.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “ClipVR 302”
and enter the passcode “0000”. When the pairing is completed, the headset’s status
indicator will flash blue light rapidly five times.
If the pairing cannot be completed within 3 minutes after the pairing mode has been
activated, the headset’s status indicator will flash purple rapidly five times and then turns
to standby mode. Repeat steps 1 to 3 to pair both devices again.
You may reset the headset to its default settings. Resetting will also remove the pairing
history of your headset with the mobile phone.
1. Hold the volume key and the plug charging cable into the charging socket. The status
indicator will flash purple 3 times.
2. Release the volume key.
3. The status indicator will stay red again and the headset is reset.
Function
POWER ON
Press and hold the
MFB
for 5 seconds
Short beep
Flash blue light 3 times
POWER OFF
Answer a call
Press and hold the
MFB
for 2 seconds
Press the
MFB
once
Long beep
Red light for two seconds and then
the light goes off
Flashing blue light and sounding
buzzer alternately
Button
Audio
Status indictor
Using your Headset
Factory Reset
Function
End a call
Adjust Volume
Voice Dialing*
Press the
MFB
once
Press the
MFB
once
Press the Volume Key
once to increase/decrease
by 1 step (Total 6 levels)
Short beep
Short beep
Flashing blue light
Flashing blue light
Flashing blue light
Last no. Redial* Double click the
MFB
Flashing blue light
Reject a call*
Call Transfer
(headset to
mobile phone)*
Call Transfer
(mobile phone
to headset)*
Press and hold the
Volume Key for 2 seconds
While speaking, press and
hold the volume Key for 2
seconds
hile speaking, press
MFB
once
Flashing blue light
Flashing blue light
Flashing blue light
* Subject to mobile support
Button
Audio
Status indictor
When you turn on your headset for the first time, the headset proceeds into pairing mode,
i.e. the status indicator flashes blue and red alternately, so that you can immediately pair it
with your mobile phone.
Say the voice tag as soon as you hear the short beep and you must have recorded the
voice tag into your mobile phone.
