i-tec USB 2.0 Fast Ethernet Adapter, Руководство пользователя

Страница: 10 / 35

5
the cable connection between all the network devices.
Verifying the Driver
To verify the driver of the adapter, follow the steps below to open the Device
Manager on Windows®.
1. Following the path as below to open the device manager
Windows® 7 / Windows® 8: Control Panel \ System and Security \ System \ Device
Manager
Windows® XP: Control Panel \ System \ Hardware \ Device Manager
2. In the Network adapters group, an item named ASIX…Ethernet Adapter should be
listed.
To verify the driver of the adapter, follow the steps below to open the
Device
Manager on Mac®
1. Please connect the USB to LAN device to Mac.
2. Click the System Preferences->Network-> USB Fast Ethernet device AX88772B
active on line or About This Mac>System Profiler>Hardware>USB and you see
driver AX88772B.
Note: If there is a (question) or (exclamation) mark next to that item, then
the driver is not properly installed. Please delete the item, unplug the adapter and
repeat the installation steps.
Package Content
■
i-tec USB 2.0 Fast Ethernet Adapter
■
CD (Driver and User's manual)
■
Quick Installation Guide
FAQ
Question : All is OK, only Ethernet speed on adapter is displayed 10 Mbps, where is
problem?
Answer: Please verify all cabling between PC/NB and active Ethernet device (hub,
switch, router) and formly plug in all RJ-45 connectors. Maybe help you exchange
Ethernet cable between PC/NB and active device for certificated one.