8
Quick Start / USB-C / USB-A 3.0 3x 4K Docking Station
EN
supporting up to
1x 4K 3840x2160@30Hz
(the HDMI port is only available
in case of connection of the docking station to a USB-C port of your laptop)
•
2 monitors connected by means of Display Ports support up to
•
4K 4096x2160@60Hz
and 1 monitor connected via HDMI supporting up to
•
4K 3840x2160@30Hz
(the HDMI port is only available in case of connection
of the docking station to a USB-C port of your laptop)
A remark for macOS and monitors with two DP cables:
Some displays with the resolution higher than 4K require two Display Port cables
for the image transfer in full resolution:
•
Dell UP2715K 5K 27-inch monitor is supported at iMac (Retina 5K, 27-inch,
the end of 2014) or newer and at Mac Pro (the end 2013) with OS X Yosemite
10.10.3 or newer.
•
HP Z27q 5K monitor is supported at iMac (Retina 5K, 27-inch, the end of
2014) or newer and at Mac Pro (the end of 2013) with macOS Sierra.
•
Chipset: DisplayLink DL6950, VIA VL813, Texas Instruments TPS65983
•
Power adapter: input 100-240V 50/60Hz 1.8A; output: 20V/6.75A
•
Product dimensions: 245 x 95 x 30 mm
•
Product weight: 330 g
SYSTEM REQUIREMENTS
Hardware requirements: Laptop / tablet with a free USB-A or USB-C port
Operating system: Windows 7 / 8 / 8.1 / 10 32/64 bit, Mac OS X, Linux Ubuntu
14.04 / 16.04, Android 6 or later. Windows 10 – automatic installation of OS driv-
ers. Other operating systems – manual installation of drivers. Firmware updates
automatically.
DRIVER INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 (32/64 BIT)
ATTENTION! Do not connect the docking station to your laptop / tablet until you
have installed the appropriate drivers. Drivers must only be installed before
fi
rst
use. Before installation, make sure that your system has installed the latest driv-
ers for your device and updated BIOS.
For Windows 7 / 8 / 8.1, download the drivers from our website
www.i-tec.cz/en
on the “Download” tab of this product. Run the installation from the downloaded
fi
le, select the installation language, and follow the instructions on the screen.
In Windows 10, the docking station can be connected directly, drivers are auto-
matically installed from the system when connected to the Internet.
In Windows 7 / 8 / 8.1 / 10, install the drivers as the “Administrator” user. The
screen may blink while the drivers are being installed, this is a standard process.
