8
9
USB 3.0 / USB-C / TB3 4x 4K Docking S PD 100W
USB 3.0 / USB-C / TB3 4x 4K Docking S PD 100W
EN
EN
Operating system:
Windows 10, 11, macOS, Android, ChromeOS, Linux Ubuntu 14.04 with the latest
updates
If the docking station is connected via USB 3.0, charging of laptops and tablets
is not supported
DRIVER INSTALLATION IN WINDOWS 10/11
ATTENTION! Do not connect the docking station to your laptop / tablet until you
have installed the appropriate drivers. Drivers must only be installed before first
use. Before installation, make sure that your system has installed the latest
drivers for your device and updated BIOS.
For Windows, download the drivers from our website
www.i-tec.pro/setup
on the
“Download” tab of this product. Run the installation from the downloaded file,
select the installation language, and follow the instructions on the screen.
In Windows 10/11, install the drivers as the “Administrator” user. The screen may
blink while the drivers are being installed, this is a standard process. Once the
installation is complete, we recommend restarting the notebook / tablet.
In the environment with more than one laptops equipped with Windows
10/11 operating system, a single-shot corporative installation by the system
administrator can be performed. For more information on a method of installation,
please refer to the instructions below):
https://www.synaptics.com/products/displaylink-graphics/downloads/corporate
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO
LAPTOP / TABLET)
1.
Turn on the laptop / tablet and connect the power adapter to the docking
station.
2.
Connect the docking station power adapter to the AC 110 V / 230 V network
and press the ON button.
3.
Connect the USB-C cable to the USB-C port on the back panel of the docking
station.
4.
Plug the other end into an available USB-A, USB-C or Thunderbolt
TM
3 port
on all devices.
5.
Subsequently, the automatic installation of ports in each system starts.
6.
After the installation is complete, restart the laptop / tablet.
In Windows, the LAN port appears in Start
→
Control Panel (Show Small Icons)
→
Device Manager
→
Network Adapters as
“USB Ethernet”
. The docking station
appears in Start
→
Control Panel (Show Small Icons)
→
Device Manager
→
Graphic
Adapters as „
Quad Video Dock
“. Audio ports can be found in Start
→
Control Panel
(Show Small Icons)
→
Device Manager
→
Audio, Video and Game Controllers as
“
USB Dock Audio
“.
If any of these devices are marked with yellow ! or ?, then the docking station
is not installed correctly. In this case, disconnect the docking station, uninstall
the existing drivers (see chapter “Uninstalling Drivers”), and reinstall the latest
drivers available on our website
www.i-tec.pro/en
on the “Download” tab of this
product. Then reconnect the docking station to the laptop / tablet. In case of
problems, please contact our technical support:
.
DRIVER INSTALLATION IN MACOS X
ATTENTION! Do not connect the dock to your Mac until you install the appropriate
drivers. Drivers must only be installed before first use. We recommend that you
have the latest macOS operating system installed.
Download drivers from our website
www.i-tec.cz/setup
on the “Download” tab of
this product and run the installation:.
Unpack the file on your MacBook desktop as a virtual disk, select “Drivers” and
then “DisplayLink Software Installer”. Then select the installation language and
follow the on-screen instructions, enter the user password if necessary. The
screen may blink while the drivers are being installed, this is a standard process.
After the installation is complete, restart the MacBook.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION
TO MACBOOK)
1.
Turn on the MacBook and connect the power adapter to the docking station.
2.
Connect the docking station power adapter to the AC 110 V / 230 V network
and press the ON button.
3.
Connect the USB-C cable to the USB-C port on the back panel of the docking
station.
4.
Plug the other end into an available USB-A, USB-C or Thunderbolt
TM
3 port
on your device.
5.
Subsequently, automatic port installations are started.
6.
After the installation is complete, restart the MacBook.
