E
N
G
L
IS
H
Package contents:
Bluetooth Optical Mouse
1x AA 1.5V battery
User´s manual
Installation Guide:
Step 1: Installing the battery
Whenever new battery is installed, make sure that the battery is undamaged.
Remove the battery cover.
Insert one AA battery into the battery compartment, make sure to properly orient the positive and negative
ends (+/-) as specified by the marks in the battery compartment. Replace the battery cover and make sure it is
locked.
Switch on the mouse, LED light will blink.
Low-voltage alarming function: when the battery have been used for some time and discover the LED light in
„DPI-adjusting button“ blinks automatically, which reminds you that battery´s voltage is becoming low,
suggested you replace the battery with new one.
Step 2: Connecting the Bluetooth mouse
Before you install the Bluetooth mouse, please make sure that your computer supports Bluetooth function, and
finishes the Bluetooth software installation. Press the Link button for 2 seconds, the LED light in „DPI-adjusting
button“ will blink, it´s now searching the Bluetooth device. Then please follow the below procedures to install the
mouse (It can slightly differs according to the Bluetooht software):
Make sure that the Bluetooth function has been activated. Double click the Bluetooth Icon on the Task Bar or in
the Control Panel, click „Add a Bluetooth device“.
Select „My device is set up and ready to be found“, click „Next“.
Select Bluetooth mouse, click „Next“.
In case the mouse requires pairing PIN code, enter „0000“.
Note: If you use other Bluetooth software, the installing procedure may be similar. You need to try and understand it
by yourself.
EN
05
i-tec BlueTouch 244
