i-team i-vac co-botic 1700, Руководство пользователя, Страница: 22 / 31

22
6.9 Using the cleaning buttons
1.
The buttons at the bottom of the screen
are explained below:
a. Dock – Will send the cobot back
to it’s charging base. You can
pause the process by pressing
this button again
b. Start – Will start the cleaning
process based on what mode is
selected (Pin and go, Zone, or
Auto)
c. Suction – Controls the power of
the vacuum motor. This setting
will automatically adjust
depending on floor type for
optimal cleaning.
d. More – Accesses other features
described in this manual
The cleaning buttons
6.10 Other features
These features are found under the
“More” button
1.
Scheduling cleaning
a. Select “Timer”
b. Set the dates and times that you
would like to schedule the
cleaning and if you want to be
notified
2.
Manual control
a. This allows you to move the
cobot manually
b. NOTE: Due to network latency,
there may be a significant delay
between pressing the movement
button and the actual movement
of the cobot. It is advised to use
the infrared remote included with
the cobot if you would like to
manually control it.
3.
Find robot
a. This feature allows you to find
the cobot in your location.
b. It will announce “Hey! I’m over
here!”
Scheduling and manual control