30
6.
Lift the old motor filter (Figure 25, pos 1) up
to remove it.
7.
Place the new motor filter (Figure 25,
pos 1).
8.
Push the filter over the motor until it is
completely down.
9.
Place the head (Figure 26, pos 1) back on
the can.
10.
Fasten the latches (Figure 26, pos 2).
11.
Replace the batteries. See section 6.1.2.
Figure 25
Figure 26
7.3
Brush and tool condition
Check the condition of the brush or tool before use. Only change the brush or tool when the machine
is turned off.
7.4
Damaged or worn parts
Damaged or worn parts need to be replaced immediately. Contact your local i-team Global partner
or visit www.i-teamglobal.com for more information.
