Warnings
1. All mains electrical wiring should be carried out by a fully qualified electrician and tested regularly
during installation.
2. All electrical work carried out in England and Wales must comply with Part P of the Building
Regulations. If you are located elsewhere check local Building Regulations.
3. Always ensure electricity is switched off at the consumer unit before any wiring work is started.
4. If the Bluetooth module is installed in a bathroom ceiling space you must use a suitable ceiling
mounted pull cord switch or a wall mounted ON/OFF power switch positioned outside the bathroom.
5. The Bluetooth module is designed to be mounted in the ceiling space, always make sure there is
sufficient space surrounding the unit (a minimum of 15cm) to allow sufficient ventilation.
6. Before drilling or cutting into ceiling or walls it is recommended you use a suitable detector to check
for hidden cables and pipes.
7. If the speakers are to be mounted in a ceiling with a room(s) above, in most instances, each speaker
will need to be fitted with a fire hood (not supplied). Please check local Building Regulations.
8. Do not disassemble or modify the speaker or Bluetooth module there are no user serviceable parts.
9. Do not mount the speakers or module close to any heat source.
10. Do not mount the speakers in the ceiling of a shower cubicle or above baths or wash basins.
2 x 6W Ceiling speakers
1 x Bluetooth prewired receiver module - with 2 x 3m speaker cables and 25cm power lead
1 x User guide
Features and box contents
Introduction
You can install this kit into your ceiling for easy and safe music listening in any room you choose. It is
simple to pair with any Bluetooth enabled device such as a smartphone or tablet, and minimises the
risk of water damage to your expensive electronics. Perfect for kitchens, bedrooms and bathrooms.
The prewired compact Bluetooth module is fitted in the ceiling space and can be connected to an
existing lighting circuit.
The speakers are very low profile and when mounted sit almost flush with the ceiling. They are fitted in
the ceiling in much the same way as downlights and fit into cut outs the same size as most downlights
for a simple and discrete solution.
Positioning and planning the wiring of the Bluetooth module
There are three methods for connecting the Bluetooth module to an existing 6A lighting circuit.
Bear in mind you need to position the module within 3m of both speakers if you want to use the
prewired speaker cable to reach the speakers in their mounted position.
1. Wiring to an existing lighting rose if there is sufficient terminal space. Please note this method should
only be used if you want the Bluetooth module powered
only
when the lighting is switched on.
2. Wiring a new junction box into the lighting circuit. This method requires running a new cable to an
on/off light switch.
3. Wiring to an existing Wago type junction box in the lighting circuit. This method requires running a
new cable to an on/off light switch.
Positioning and wiring an ON/OFF power switch for the Bluetooth module
There are a number of options for positioning an ON/OFF switch.
1. Running a cable from a ceiling junction box to a new wall mounted switch or ceiling pull cord switch.
2. Running a cable from a ceiling junction box to an existing switch position and replacing a single
light switch with a twin lighting switch (or replacing a twin switch with a triple switch).
N.B. We have supplied a transparent label with a speaker symbol to mark the switch used for the speaker.