PC volume should be adjusted separately.
Using the FM radio (First time set up)
1.
Move the power switch on the right side of the Bassonix to
the “ON” position and the speaker will say what mode it is in. If
the speaker is not in FM mode, press the mode button until
the speaker says “FM mode” and the screen panel shows an
FM radio station.
2.
Press and hold the scan button on the speaker or remote for
three seconds and release for the speaker to begin the
scan/channel save function. The speaker will scan and save the
FM radio stations with the strongest frequency. Once it is
complete with the scan/channel save function the FM radio
will start on channel 01.
NOTE:
You must allow the speaker to scan all FM radio stations
until complete.
3.
Short press the track forward or back button on the speaker
or remote to browse through the saved channels.
4.
Long press the track forward or track back button on the
speaker or remote to semi-auto scan FM channels. This allows
you to go to a FM radio station that was not saved in the
scan/channel save function.
5.
You can also use the remotes digital keypad to type in the FM
radio station of your choice. For example, press numbers “8”, “7”,
and “8” and hit the confirm button to go to FM radio station 87.8.
NOTE:
While playing in FM mode the play/pause button only
serves as a mute button. The FM radio station will still continue
to play but will remain muted until the play/pause button is
pressed again.
