powered USB port, such as a computer, laptop or USB AC
adapter (not included).
2.
Plug the Micro-USB end of the cable into the charge port
labeled DC-5V located on the back of the speaker.
3.
The LED indicator light located to the left of the buttons will
illuminate solid red. Once the speaker is fully charged, the LED
indicator light will turn off.
Connecting via Bluetooth® (first time set-up)
1.
Move the power switch on the back of the ConcertBlok Pro to
the “ON” position. The speaker will make a sound and the LED
indicator light located on the top of the speaker will flash blue.
NOTE:
Once the LED is flashing blue, you can connect your
device to the speaker via Bluetooth®.
2.
Open the settings on your smartphone, tablet or computer
(Bluetooth® must be enabled).
3.
Select ConcertBlok Pro from the devices list.
4.
Once paired, you will hear a sound and the LED indicator
light will slowly flash blue.
5.
Volume can be adjusted from either your device or by using
the Volume buttons on the ConcertBlok Pro.
6.
Tracks can be changed by using the Track buttons on the
ConcertBlok Pro.
NOTE:
Your device will automatically find and pair with the
ConcertBlok Pro after the initial pairing. If your device does not
automatically pair, repeat steps 2-4.
NOTE:
Press and hold the Phone/play/pause button on the
ConcertBlok Pro to disconnect from the Bluetooth® pairing in
order to allow another user to connect to the speaker.
