i-SENS CareSens N Plus BT, Руководство пользователя

Страница: 18 / 33

36 www.i-sens.com www.i-sens.com 37
Step 5
The lancing device has six puncture
depth settings, numbered 0 through 5
(0 for a shallow puncture, 5 for a deeper
puncture).
Choose a depth by rotating the top
portion of the adjustable tip until the
desired number aligns with the arrow.
Step 6
To cock the lancing device, hold the
body of lancing device in one hand and
pull the sliding barrel with the other
hand. The device is loaded when you
feel a click and the load confirmation
window turns red.
Note: The skin depth to get blood samples will vary for
various people at different sample sites. The lancing device's
adjustable tip allows the best depth of skin penetration to
get an adequate sample size.
Note:
0 = least penetration of lancet into the skin.
5 = most penetration of lancet into the skin.
Step 8
Obtain a blood sample using the lancing
device. Place the device against the pad
of the finger. The best puncture sites are
on the middle or ring fingers.
Press the release button. Remove the
lancing device from the finger. Wait a
few seconds for a blood drop to form.
A minimum volume of 0.5 microliter is
needed to fill the confirmation window
(actual size of 0.5 μL: )
Applying Blood Sample
Step 7
Insert a test strip with the contact bars facing upwards into the
meter’s test strip port. Push the strip in gently until the meter
beeps. Be careful not to bend the test strip. The symbol
will appear on the screen.
Preparing the Meter and Test Strip