i-SENS CARESENS DUAL, Руководство владельца

Страница: 29 / 35

54
www.i-sens.com www.i-sens.com
55
Understanding Error Messages
A used test strip was inserted.
> Repeat the test with a new test strip.
The blood or control solution sample was
applied before the symbol appeared.
> Repeat the test with a new test strip and wait
until the symbol appears before applying
the blood or control solution sample.
The blood sample has abnormally high viscosity
or insufficient volume.
> Repeat the test with a new test strip.
The temperature during the test was above or
below the operating range.
> Move to an area where the temperature is
within the operating range for blood glucose
test (5–45˚C) or the operating range for blood
β -ketone test (15–30˚C) and repeat the test
after the meter and test strips have reached a
temperature within the operating range.
Step 4
On pressing the
◀
button, the number
indicating the minute will start blinking.
Press the
▶
button to set the minute.
Step 5
Press the
S
button to finish and to go to
‘alarm2’ mode.
Repeat steps 2 to 4 to set the remaining
time alarms (alarm2–3).
Step 6
Press the
S
button for 3 seconds to finish and turn the meter
off.