Quick Start
11
6.2
Charging the Battery
Please carefully read chapter 10.1 (Battery and charger in-
formation) before charging the battery.
When you disconnect the power cord of any accessory, grasp
and pull the plug, not the cord.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector. The
red indicator light is displayed during charging. Charging the
battery fully may take up to three hours.
3. When the battery is fully charged, the green indicator light
is displayed. Disconnect the charger from the headset, then
from the wall outlet.
If the status light (5) is red, recharge the battery. When the
battery charge is low, the headset beeps every 5 minutes and
the red indicator light flashes.
Warning
The phone may only be charged at ambient temperatures in a
range from 0°C ... 40°C. Please do not use charging equipment
if the temperature exceeds this range. Only use approved
chargers. Use of any other charger may cause danger and will
void the warranty.
6.3
Power on/off
To switch on, press and hold the power key for about 2 se-
conds. The headset beeps, and the blue indicator light is dis-
played. The headset tries to connect to the last connected
device.
To switch off, press and hold the power key for about 2 se-
conds when the headset is on. The headset beeps, and the
blue indicator light is briefly displayed. If the headset is not
connected to a device within about 3 minutes, it switches off
automatically.
