i.safe MOBILE M53A01, Быстрый старт, Страница: 8 / 99

8
IMPORTANT INFORMATION!
FACTORY RESET/ACTIVATE OEM MODE
If you have set up a Google
TM
Account, it is important to proceed with the following steps be-
fore you make a factory reset. This ensures that all private data will be deleted on the device:
<Settings> <About phone> tip seven times on <Build number> (to activate the de-
veloper mode) back to <Settings> <Developer options> enable <OEM unlocking>
enable back to
<Settings> <Backup & reset> <Factory data reset>
If you do not enable the OEM unlocking, the device will always ask you to sign in with the
previously synced Google Account after the restart. In that case the device is unusable for
other user.
RECYCLING
The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging
reminds you that all electrical and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their working life. This requirement
applies in the European Union. Do not dispose of these products as unsorted municipal
waste. Always return your used electronic products, batteries, and packaging materials to de-
dicated collection points. This way you help prevent uncontrolled waste disposal and promote
the recycling of materials. More detailed information is available from the product retailer, local
waste authorities, national producer responsibility organisations, or your local i.safe MOBILE
GmbH representative.
Correct Disposal of this product. This marking indicates that this product should not be
dispose other household wastes throughout the EU. To prevent possible harm to the environ-
ment or human he from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can take
this product for environmental safe recycling.
INFORMATION CONCERNING SAR CERTIFICATION
Maximum SAR values for this model and the conditions under which these were determined:
SAR (head)
< 2.0 W/kg
SAR (body - worn) < 2.0 W/kg
This device was tested for typical body-worn operations with the back of the handset kept
5 mm from the body.
5 mm from your body.
The product shall only be connected to a USB interface of version USB2.0.
Adapter shall be installed near the equipment and shall be easily accessible.
TRADEMARKS
i.safe MOBILE
and the
i.safe MOBILE
logo are registered trademarks of the
i.safe MOBILE GmbH.
Google is a trademark of Google LLC.
All other trademarks and copyrights are the properties of their respective owners.