i.safe MOBILE M53A01, Быстрый старт, Страница: 4 / 99

4
ENGLISH
INTRODUCTION
This document contains information and safety regulations which are to be observed without
fail for safe operation of the device Model M53A01 under the described conditions. Non-ob-
servance of this information and instructions can have serious consequences and / or may
violate regulations.
Please read the manual and these safety instructions before using the device. In case of any
doubt, the German version shall apply.
found at www.isafe-mobile.com or requested from i.safe MOBILE GmbH .
RESERVATION
The content of this document is presented as it currently exists. i.safe MOBILE GmbH does
not provide any explicit or tacit guarantee for the accuracy or completeness of the content of
-
.
i.safe MOBILE GmbH reserves the right to make changes to this document or to withdraw
it any time without prior notice. Changes, errors and misprints may not be used as a basis for
any claim for damages. All rights reserved.
i.safe MOBILE GmbH
cannot be held responsible for any data or other loss and direct or
indirect damages caused by any improper use of this device.
The Model M53A01
and 2/22 in accordance with directives 2014/34/EU and 2014/53/EU, as well as the IECEx scheme.
ATEX:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db IP6X
EPS 19 ATEX 1 037 X
CE-designation: 2004
IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db IP6X
.0014X
Temperature range:
-10°C … +50°C
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
The EU-declaration of conformity can be found at the end of this manual.
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it must
be withdrawn from use and removed from any ex-hazardous areas immediately. Measures
must be taken to prevent any accidental restarting of the device. The safety of the device may
be compromised, if, for example: