4
ENGLISH
INTRODUCTION
This document contains information and safety regulations which are to be observed without
fail for safe operation of the device
DOCKING STATION IS-DS930.1
under the described
conditions.
Non-observance of this information and instructions can have serious consequences and / or
may violate regulations. Please read the manual and these safety instructions before using
the device. In case of any doubt, the German version shall apply.
The current EU-declaration of conformity, certificates, safety instructions and manuals
can be found at www.isafe-mobile.com, or requested from
i.safe MOBILE GmbH
.
RESERVATION
The content of this document is presented as it currently exists.
i.safe MOBILE GmbH
does
not provide any explicit or tacit guarantee for the accuracy or completeness of the content of
this document, including, but not restricted to, the tacit guarantee of market suitability or fit-
ness for a specific purpose unless applicable laws or court decisions make liability mandatory.
i.safe MOBILE GmbH
reserves the right to make changes to this document or to withdraw
it any time without prior notice. Changes, errors and misprints may not be used as a basis for
any claim for damages. All rights reserved.
i.safe MOBILE GmbH
cannot be held responsible for any data or other loss and direct
or indirect damages caused by any improper use of this device.
EU-DECLARATION OF CONFORMITY
The EU-declaration of conformity can be found at the end of this manual.
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it must
be withdrawn from use immediately. Measures must be taken to prevent any accidental
restarting of the device. The safety of the device may be compromised, if, for example:
Malfunctions occur.
The housing of the device shows damage.
The device has been exposed to excessive loads.
Markings or labels on the device are illegible.
We recommend that a device displaying errors or in which an error is suspected be sent back
to
i.safe MOBILE GmbH
to be checked.
EX-RELEVANT SAFETY REGUALTIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood manual, safety instructions. The following safety regulations must
also be complied with:
