14
Detail specifications
•
Basic
Power source *
1
:
DC 12 V
PoE (IEEE802.3af compliant)
Power consumption *
1
:
DC 12 V: 890 mA/ Approx. 10.7 W
PoE DC 48 V: 230 mA/ Approx. 11.0 W (Class 0 device)
Operating environment
Ambient operating temperature:
Ambient operating humidity:
–10 °C to +50 °C {14 °F to 122 °F}
10 % to 90 % (no condensation)
Storage environment
Storage temperature:
Storage humidity:
–30 °C to +60 °C {–22 °F to +140 °F}
10 % to 95 % (no condensation)
Monitor output
(for adjustment):
VBS:
1.0 V [p-p]/75 Ω, composite, ø3.5 mm mini jack
An NTSC or PAL signal can be outputted from camera
(either press the INITIAL SET switch quickly (within 1 second) or
use software to select NTSC or PAL signal).
EXT I/O terminals:
ALARM IN1
(Alarm input 1/ Black & white input/ Auto time adjustment input) (×1)
ALARM IN2 (Alarm input 2/ ALARM OUT) (×1)
ALARM IN3 (Alarm input 3/ AUX OUT) (×1)
Audio input:
ø3.5 mm stereo mini jack
For microphone input: Recommended applicable microphone: Plug-in power type
(Sensitivity of microphone: -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz))
Input impedance: Approx. 2 kΩ (unbalanced)
Supply voltage: 2.5 V ±0.5 V
For line input: Input level: Approx. –10 dBV
Audio output *
2
:
ø3.5 mm stereo mini jack (Audio output is monaural.)
Output impedance: Approx. 600 Ω (unbalanced)
Output level: –20 dBV
Shock resistance:
IK10 (IEC 62262)
Dimensions:
ø129.5 mm × 103.5 mm (H) {ø5-3/32 inches × 4-1/16 inches (H)}
Dome radius 41.5 mm {1-5/8 inches}
Mass:
Approx. 830 g {1.83 lbs}
Finish:
Main body:
Aluminum die cast, i-PRO white
Dome cover:
Polycarbonate resin, Clear
Others:
Tamper-resistant enclosure*
3
*1 Refer to our support website <Control No.: C0106> for further information about Power source and
Power consumption information.
*2
X227x
This camera is not equipped with the function to change the audio output to the monitor output.
X225x
The audio output can be switched to the monitor output. Refer to the “Operating
Instructions” on our support website for descriptions of how to switch the output.
*3 Component that has a structure on which the screws that are accessible after installation cannot be
screwed or unscrewed using an ordinary screwdriver.
