120
51. Change the setting so that SNMP is not used in the default
state (Off)
(Operating Instructions - Configuring the network settings [Network] -
Configure the settings relating to SNMP)
The default “On/Off” in “SNMP” on the “Advanced” tab of the “Network” page has been changed
to “Off”.
SNMP setting
・
[SNMP setting]
Select whether to On/Off the SNMP function.
Default:
Off
52. About the effect of the maximum shutter setting on the auto
track function
(Operating Instructions - Configure the settings relating to PTZ [PTZ] -
Configure the settings relating to auto track (“Auto track” setup menu))
(Operating Instructions - Configure the settings relating to PTZ [PTZ] -
Configure the settings relating to auto track alarm (“Auto track alarm” setup
menu))
The note description has been changed because the tracking performance of the auto track
function may lower depending on the [Maximum shutter] setting.
Note:
• Auto track setup is not available under the following conditions.
– When “16:9 mode(60fps mode)”, “16:9 mode(50fps mode)”, “4:3 mode(15fps mode)” or “4:3
mode(12.5fps mode)” is selected for [Image capture mode]
• Under the following conditions, auto track setup is available, but the auto track performance
will lower.
– When [Maximum shutter] of [Image adjust] - [Light control mode] is set to “Max.2/30s”,
“Max.4/30s”, “Max.6/30s”, “Max.10/30s”, or “Max. 16/30s”.
(For auto track, the “Max.1/30s” setting is recommended.)
