4-channel Receiver Side Unit connection example
In this example, the camera is powered by PoE and the receiver side unit is powered
by an AC adaptor.
E
D
D
D
D
B
G
F
A
C
C
C
C
A
A
A
Ethernet cable (Cat-5e or higher, straight)
Ethernet cable (Cat-5e or higher, straight)
Coaxial cable
Camera
Camera side unit
Receiver side unit
Switching hub
IMPORTANT
•
A BY-HPE11KTA coaxial - LAN converter cannot be connected.
•
Use Cat-5e or higher Ethernet cables.
•
Use 8-wire (4-pair) Ethernet cables.
•
Use an Ethernet cable to connect the camera directly to the camera side unit.
Do not connect a hub between the camera and the camera side unit, and do not
make connections with multiple Ethernet cables.
•
After disconnecting an Ethernet cable, wait at least 2 seconds before connecting
it again. If the cable is reconnected too quickly, power may not be supplied form
the PoE power supply.
•
Some crossover-type Ethernet cables cannot supply power using PoE.
34
Operating Instructions
4 Connecting the Unit
