13
Major operating controls and their functions
(continued)
How to prevent the power cord from disconnecting
Fix the power cord at 15 cm to 20 cm {5-7/8 to 7-7/8
inches} from the connector with the included cable clamp
(for power cord) passed through the clamp mount.
①
Cable clamp
(for Power cord)
Clamp mount
①
Pass the cable clamp (for power cord) through
the slit on the lower side of the clamp mount.
②
15 cm
～
20 cm
{5-7/8 ~ 7-7/8 inches}
②
Tighten the cable clamp 15 cm to 20 cm from
the power cord connector to fix it to the clamp
mount. Cut the excessive part of the cable
clamp if necessary.
How to prevent the Ethernet cable from disconnecting
Tighten and secure the bundled Ethernet cable with the two
supplied cable clamps inserted in the two clamp mounting
holes so as to prevent the Ethernet cable from disconnecting
from the camera port.
Cable clamp
(For Ethernet cable)
①
①
①
Insert the two supplied cable clamps (for
Ethernet cable) into the clamp mounting holes.
②
Insert the Ethernet cable into the network port.
③
Tighten the Ethernet cable properly by tightening
the two cable clamps. Cut the excessive part of
the cable clamp if necessary.
