i-OnTemp User Manual
Rev 1.0
Pg. 6
2.
Installation instructions
I-OnTemp is a Plug and Play system aimed to be installed at the entrance of secured areas. It will help you recognize and avoid persons with
fever and keep public areas as healthy as possible.
i-OnTemp should be charged using standard USC Type C charger. I-OnTemp has an autonomy of 6-8 hours to allow unit portability. Yet, it is
recommended to continuously charge if it is in a fixed place.
Placing i-OnTemp
i-OnTemp can be placed on any counter or table by unfolding built in legs on
the bottom of the unit. To unfold the legs simply turn them to be
perpendicular to the unit itself.
In addition, i-OnTemp has ¼” screw that allows it to be installed on any
standard stand or tripod.
Positioning i-OnTemp
Thermography technology is influenced by the distance of the object
verified. The camera position and angle are key factors for the accuracy
of temperature verified.
