I/O Interconnect SV142P1, Руководство пользователя

Страница: 18 / 27

Ioint® Secure DVI 4K KVM Switch User Manual
ƒ‰‡ͳͻ
Common Access Card (CAC) Configuration and Operation
CAC connection to the computer requires a separate USB cable connection and
allows the user to specify whether there is a CAC required for that computer or not
.
This allows the CAC to be connected and controlled separately to the keyboard,
mouse, video and audio.
Step 1
– Installation
1.1 Using the included USB cable, connect one end of the cable to the computer that requires
CAC, and the other end to the CAC port on the I/O DP-DP KVM
that corresponds to the computer.
1.2 Enable CAC for the same port connection in Step 1 . 1 by switching the CAC switch to the right.
1.3 Repeat steps above for additional computers that require CAC.
Note: Make sure that the CAC switch is disabled (left) for all other non-connected CAC systems.
1.4 Once configured, the CAC connection will be switched only when required by the connected computer .
When switching from a CAC enabled port to a non-CAC enabled port, the CAC connection will remain
with the last previously selected port where the CAC was set to enable.