I-O Corporation TC4000, Руководство пользователя

Страница: 3 / 23

Hardware User’s Guide
Preface 3
Preface
Thank you for purchasing the I-O Thin Client. This guide contains information to setup and use the thin
client hardware.
The guide consists of the following chapters:
•
Introduction : provides an overview of the product.
•
Installation : contains the procedure to setup the hardware.
•
Specifications : provides hardware, mechanical, electrical, interface and operating environment
specifications.
•
Connectors and Cables : provides detailed specifications for connectors and cables used with the
product.
•
Troubleshooting : provides solutions to problems that you may encounter while using the product.
The following symbols are used in the guide.
Caution : This symbol highlights procedures that, if not correctly performed or adhered to, could
damage or corrupt the product or adversely affect the security and functionality of the product.
Do not proceed beyond such points until the required conditions are fully understood and
achieved.
Note : This symbol denotes useful additional information that is relevant to the procedure or
feature being described.
Tip : This symbol denotes a hint, shortcut or alternate method to aid or supplement the
procedure being described.
Consistent with our policy of continuous development, the product you received may have
features different from to those described in this guide. Please visit our web-site
www.iocorp.com for current information.
Warning
•
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
•
Ensure that the screws provided with the D-type connectors (COM1, COM2, Video and Parallel
ports) are fastened.
•
This equipment should not be used in electro-medical applications.
• There are no user serviceable parts inside.
DO NOT disassemble the equipment as this can nullify your warranty
•
DO NOT operate this equipment in a corrosive or explosive atmosphere.
•
DO NOT operate this equipment outside specified temperature limits.
• This equipment must be earthed.
9