I-MED I-PEN Скачать руководство пользователя страница 7

12

13

6. CLEANING AND MAINTENANCE

7. OPERATING AND STORAGE CONDITIONS

6.1. CLEANING

6.2. MAINTENANCE

6.1.1. I-PEN

®

 DEVICE

6.1.2. SINGLE-USE-SENSORS

6.2.1. TROUBLESHOOTING

The I-PEN

®

 can be cleaned with a damp cloth or alcohol wipe as required. When cleaning, it is 

important to keep the electronic contacts of the control unit and Reader dry. The electronic contacts 

and docking port should also be kept free of dust and dirt.

To ensure warranty coverage and reliable system operation, defective system components should  

be serviced and/or replaced exclusively by I- MED Pharma Inc. authorized personnel, and replacement 

parts should be those specified by the manufacturer. It is important to use and store the device within 

the environmental conditions shown in the table below.

Single-Use-Sensors are for use on a single eye. Never reuse or try to clean a Single-Use-Sensor.

Single-Use-Sensors are for single use only. Never reuse or try to clean a Single-Use-Sensor.

The I-PEN

®

 Osmolarity System is designed to work without direct service or preventive maintenance. 

If quality checks fail, contact I-PEN

®

 Customer Support.

Battery should be replaced when “Low Bat” indication appears on the screen.

Condition

Possible Cause

Recommended Action

The “I-PEN Ready” message

does not display

Battery not installed.

Device malfunction.

Verify that the correct type of battery is 

installed, and that the battery is fresh.

Contact I-PEN

®

 customer support.

A “beep” is not heard when

the device is turned on

Device malfunction.

Contact I-PEN

®

 customer support.

“Low Bat” indication appears 

on screen

Battery close to

end-of-life.

Replace battery.

Screen goes dim

Battery close to

end-of-life.

Replace battery.

Transport and Storage Temperature

2°–35°C/36°–95°F

Transport and Storage Relative Humidity

10–85%  non- condensing

Transport and Storage Altitude

0–2,000 meters

Operating Temperature

15°– 30°C/59–86°F

Operating Altitude

0–2,000 meters

Operating Relative Humidity

10–85%  non- condensing

NOTE: 

If the Recommended Action does not solve the problem, 

contact I- MED Pharma Inc. Customer Support.

Single-Use-Sensors may be ordered on line at www.imedpharma.com or by calling your 

representative at I- MED Pharma Inc. Tel. Number: (800)  463- 1008 or (514)  685- 8118.

I-PEN

®

 User Guide  

|

  CLEANING AND MAINTENANCE

I-PEN

®

 User Guide  

|

  OPERATING AND STORAGE CONDITIONS  |  TECHNICAL SPECIFICATIONS

8. TECHNICAL SPECIFICATIONS

Calibration

No calibration required

Degree of Protection Against Electric Shock

BF Type applied part

Size (not including probe holder)

W 140mm

L 223mm

H 140mm

Weight

50 gm

Battery

CR2032

Frequency

80 Hz

Peak Voltage

± 1.5V

Current Source

Max100 μA AC

Sinus Distortions

5%

WARNING: 

Cleaning fluids should never be used on the Single-Use-Sensor.

Содержание I-PEN












Отзывы: