I+ME ACTIA BMS Master 4, Руководство по оборудованию, Страница: 6 / 76

Hardware Manual
BMS Master 4 / 4.5
Ref.: IR14417 A 09.10.2017 Page 6/76
1.
I
NTRODUCTION
Please read the present operation and safety remarks carefully. The instructions
refer to all components of the BMS.
The name BMS Master applies both for the BMS Master 4 and Master 4.5. There are
differences they are separately described for Master 4 and Master 4.5.
1.1
A
PPLIANCE AND
S
AFETY
I
NFORMATION FOR
ACTIA I+ME B
ATTERY
M
ANAGEMENT
S
YSTEM
(BMS) C
OMPONENTS
The BMS MASTER and Slave are two electronic components, which shall be used together in
Lithium Ion batteries to control the battery system and charge status of each cell.
1.1.1. D
ETERMINED
U
SE
, C
ONNECTION AND
I
NSTALLATION

Please always observe the corresponding DIN/VDE/EN/IEC/ANSI guidelines. Be informed with the
specification and guidelines of the user and the respective manufacturer of the cells and accordingly
of the battery.

Batteries are electrochemical components with very high short-circuit currents. Under all
circumstances avoid short-circuits that endangers you, the whole construction and other operators.

All BMS-components and the provided equipment have to be used only for purposes described in
the corresponding manuals. Incorrect use and operation of the components may damage the
construction where they are installed.

Damaged components and such that have exceeded their lifetime have to be replaced immediately.

Only adequately qualified specialists, trained in handling of batteries and skilled in safety
requirements for working with batteries may install the BMS.

After implementation of the BMS in the system a qualified specialist has to check the function and
safety of the whole installation.

Due to the high voltage a sufficient insulation of the Slaves, their cabling and connected sensors is
essential
.
1.1.2. W
ARRANTY AND
R
ESPONSIBILITY

Fundamentally our standard business conditions apply which are available to our client since the
conclusion of the contract.

The ACTIA I+ME Battery Management System Components are complex parts intended for
operation in powerful batteries. The components achieve a number of surveillance functions
necessary for the management of lithium-ion batteries. These functions are described in provided
manuals. The user may utilize these functions; however, the safety of the whole battery is in his
responsibility.

We assume no liability and guarantee claims resulting from improper use of the system. The
producer is on no account responsible for direct or subsequent claims that may happen from
inappropriate or unprofessional use of BMS components.

Should be any of our clauses not be valid the German law applies.

We reserve our right to do further development of the system and modifications of this manual
without previous announcement.