i-mate Pam, Руководство пользователя, Страница: 64 / 149

64
☺ Note: WLAN (Wi-Fi) is the default wireless channel setting for your device. However, GPRS starts by default if your device does not detect any Wi-Fi signal.
WLAN transmitter can’t operate simultaneously with the GSM/GPRS transmitter. So it is not capable of using both transmitters at the same time.
To connect to a Wi-Fi network
•
Tap Start > Settings>Connections Tab>Wi-Fi settings
•
Tab Main tab .Input Status
、
Current Configuration and Signal Quality.
• Tab Ok.
•
Tap Start >Settings > Connections tab > Wireless Manager , you can see an option named Wi-Fi there, with its status (On/Connecting/Available) under it.
Highlight Wi-Fi, tap Menu, and then select Wi-Fi settings to configure wireless networks.
Once some networks are detected, it pops up a list from the bottom asking you to select one to connect.
To save battery power while connected to a Wi-Fi network
•
On the Connections tab in Settings , tap Wi-Fi settings to enter Settings . You can select three modes: Always Disable; Always Enable ; and Auto Enable
.Moreover you can move the Power Save Mode slider to a position that optimizes performance with the least power consumption.
•
In Power Save Mode box, choose how you deploy the power save mode.