® Waves System
V 1.0 - 2008
I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi
ID-AL remote control handset
6 + 10 - Input on dry contact: Connect a push button, presence detector, smoke, heat, light or pressure
sensor ... relay output, or any type of contact to trigger the player on happening of an event. Create a
brief contact between «SW» input and the ground G.
- 12V (+) power supply output (to power an external device)
- Input contact (SW)
- Ground (G)
- Ground (G)
- Input contact (SW)
- 12V (+) power supply output
7 - SD memory card: Insert a memory card in the slot (minimum storage capacity 64Mo). When
inserting or removing the memory card, make sure that the player is not powered on.
9 - GPS extension connector: a GPS extension is available as an option. This module allows automated
broadcast of audio information in relation to the geographical positioning coordinates. On request.
11 - Volume setting: volume setting is provided by connecting 2 push buttons on the «VOL» connector.
Adjust volume by pressing and Volume - buttons.
- button
- Ground (G)
- Volume - button
12 - Option connector for serial link: for future extensions. On request.
13 - S/PDIF connector: To provide a digital audio S/PDIF output. On request.
14 - Amplifier: The amplifier heats up and it is important to add a cooling device. The size of the device
must be proportional to the desired power; the wall of the case, a piece of metal or a purchased cooling
device can be used.
SW
G
+
G
-
- 7 -