® Waves System
V 1.0 - 2008
I.D. AL - NanoPlayer Lecteur MP3 et Wav autonome - Mode d'emploi
- 4 -
1 - Product presentation
The NanoPlayer is an audio player which reads MP3 and WAV files stored on a SD memory card.
Playback can be automated to read files in loop or when triggered by the input contact.
The NanoPlayer is a versatile player designed for installations where broadcast of sounds, music, sound
effects or commentaries are required such as museums, exhibitions, POS displays...
2 - Functionalities
Interactivity: The NanoPlayer is interactive, i.e it can be actioned by an external event, by trigger of the
electrical contact.
Autoplay: This function is available on the NanoPlayer; the player will automatically start playing the
selected files on powering on.
Broadcast mode: The way files are organized and named on the SD card fully defines the broadcast
mode. Digit codes inserted in file names and directory names provide powerful automation of playback
patterns.
Updating: By removing the SD card from the player to transfer updates using a card reader on a PC.
Audio output: Two audio outputs are available. Line level stereo output on standard 3.5 stereo Mini-jack
to connect the player onto a sound system and amplified output on screw-in terminal block to connect
directly onto speakers. The ouput power is sufficient for several small to medium sized premises.
Power supply: The player is protected against polarity reversal. Caution, the NanoPlayer accepts
variations between 10 and 15V. Outside this range, the player could be damaged.
Amplifier output power is determined by the power supply. When the line level output is used a 500mA
6W unit is enough to power the NanoPlayer. If the integrated amplifier is used a 2A (24W) power supply
unit minimum is required. If the supply unit has insufficient power, sound will be very bad and the power
unit will heat up and eventually break down.