® Waves System
V 1.1 - 2009
I.D. AL - EventPlayer MP3/Wav/DMX player - User manual
- 11 -
●
●
●
●
●
[RET] - Returns to the previously read directory after reading the current directory.
If you read files in a particular directory and if it is interrupted by a scheduled program or an external
action to broadcast a file from another directory, goes back to the initial directory after reading the
triggered directory.
Example:
002 [RET]: Reads directory 002 and then goes back to the previous directory
- Several directories can point to the same directory then goes back to calling directory.
Example:
001 [J100]: After reading directory 001, jumps to directory 100
002 [J100]: After reading directory 002, jumps to directory 100
004 [J100]: After reading directory 004, jumps to directory 100
100 [RET]: Returns to the previous directory (001 or 002 or 004)
In the above example, after reading directories 001, 002 and 004, jump to directory 100 and then goes
back to the initial calling directory after reading directory 100.
●
●
●
●
●
[SEQ] - Specifies sequential playback mode for the current directory. Default is random
m o d e .
Example:
001 [SEQ]: SEQ for sequential numerical order
By choosing [SEQ] you select sequential mode. Sorting is done in numerical order of file names (for
naming details, see next chapter related to files organisation).
In the Sequential mode [SEQ], files which are not numbered are ignored.
Directories which do not comply to naming rules are ignored.
The default mode is the random mode RND.
The files are not read again as long as all the files have
not been read at least once. This information is not stored during a directory jump.
●
●
●
●
●
[Rxxx] - Enables or disables one or several output contacts
A directory can activate different output contacts without any additional programming. You can switch
on lamps, activate motors or any other action automatically when a directory is read.
Caution! Status of the outputs does not change whilsth the file is read. To achieve this, you
must use the Show Control function or cut the audio files in tracks.
001 [R001] - Enables output 1 while reading directory 001
001 [R255] - Enables all 8 outputs while reading directory 001
001 [R000] - Disables all outputs while reading directory 001
Values between 000 and 255 as per a binary progression. See the corresponding table in the annex.
