I-Cane Mobilo 2.1, Руководство пользователя, Страница: 16 / 21

16
enter a route name. Choose the name and insert it. It can be short or
longer. It is important that the route name is clear to you. Press SAVE to
record the route .
6.22 If you do not enter a route name and immediately choose SAVE, the
route name will be provided with the start address and the destination
address (street name + city name).
6.23 The saved route can be used directly as a route, see Using routes from
the route list ( 9 ).
6.24 Tip: start and end the recording as close as possible to the start and end
points of the route but also pay attention to an unobstructed GPS signal.
A canopy or a position directly next to a high building can result in a
considerable deviation. Check the location using the "where am I?"
position.
6.25 Tip: ensure that this start and end point are clearly observable outdoor
locations and therefore consist of tangible, visible or audible (unique)
features.
6.26 The entire route is recorded during the recording process. The decision
points that you have marked are automatically added to this route and
provided with commands for the tactile arrow and also in spoken form.
6.27 The number of routes that can be included and stored in the route list is
unlimited. Routes are in the reverse order of recording in the route list,
the last recorded route is at the top.
6.28 Recorded routes can be deleted from the route list, see Using routes
from the route list ( 9 ).
6.29 A saved route name cannot be changed / renamed .
6.30 A recorded route is not reversible.