i-box Resonate, Руководство пользователя

Страница: 5 / 48

Resonate | 05
Set up
Insert batteries (2x AAA Alkaline) into the remote taking care to observe polarity as stated in the battery
compartment.
Pair the soundbar to the subwoofer
The subwoofer and soundbar should operate within a range of about 10m of each other (provided they have
line of sight) but this range can be affected by interference from other radio signals and particularly by other
Bluetooth signals. To avoid problems setting up, place the soundbar and subwoofer close together when pairing.
Connect the soundbar and subwoofer into the mains. Switch them both on. The system is now in standby.
POWER
ON
OFF
AC 110/240v
50/60Hz
Turn on the soundbar and subwoofer by pressing the Power On / Off button (1), the soundbar should
automatically enter the BT pairing mode. Press the BT button (13) to manually enter the Bluetooth mode.
The LED display on the soundbar and the the Red LED on the rear of the subwoofer will flash.
POWER
ON
OFF
AC 110/240v
50/60Hz
POWER
ON
OFF
AC 110/240v
50/60Hz
You don’t need to pair it again. Every time you switch on, they will reconnect automatically.
Press and hold the Play/Pause button on the remote for a couple of seconds. The soundbar will connect
to the wireless subwoofer. If it pairs successfully, the ‘BT’ and red LED on the subwoofer will stop flashing
and the soundbar will beep once.