Barrel | 13
Factory Reset:
Resets your Barrel to factory default settings. This will
delete any presets or alarm settings.
FM Mode
Press the Power / Mode button (4) to enter FM radio mode.
SW version:
Software version.
Scan setting:
By default the FM scan stores all available stations even if
the signal is weak and the audio quality poor. To store just the stations with
a strong signal, follow the steps below.
Audio setting:
By default all stereo stations are reproduced in stereo. For
weak signals, this may result in poor quality audio. The audio quality can be
improved by using the mono only setting. Follow the steps below.
System:
(
FM system settings): Same as the DAB mode system settings.
System
<Factory Reset >
System
<SW version >
FM
<Scan setting >
FM
<Audio setting >
Scan setting *
<All stations >
Audio setting*
<Stereo allowed >
Scan setting
<Strong station >
Audio setting
<Forced mono >
SW version
<dab-ser-c912C-
Factory Reset
<No> Yes
Factory Reset
No <Yes>
Preset FM Mode
To save and recall a preset station while in FM Radio mode, follow the same
steps found in the DAB preset section on page 8.