HZ Security HZ-WT-ADV-24 Скачать руководство пользователя

Страница: 9 / 30

Model Number

-WT-ADV-24 User Guide

Page | 8

2021

Hangzhou Weiqi Electronic Co., Ltd.

PERATING

ODES

ORMAL

PERATION

The detector will indicate when it is ready to screen the next person and will automatically signal an

alarm along with location guidance information for any metal detected.

TANDBY

When the detector is idle over 10 minutes (time can be set from 1 to 99 minutes), it will change to

standby status. This only blanks the display screen, which can be restored by pressing any key on the

unit or on the remote control; the screen will also restore when anyone passes through.

ORMANCY

When the standby time is set for less than 10 minutes, and the detector is idle longer than the standby

time, the detector will shift to dormant status after one hour. When dormant, only the CPU is active. If

the standby time is set to longer than 10 minutes, the detector will shift to inactive status after “standby

time X 6” (If set to 12 minutes, the dormancy time will be 12X6=72 minutes). Press the “power on key”

to wake up the unit from dormancy.

YSTEM CHECK

System self-checks for faults during the boot process.

ERMINOLOGY

The following terms are used in this manual:

WTMD

Walkthrough Metal Detector.

Sensitivity

A parameter used to define the size of the detected metal object. As

sensitivity is increased, the size of the detected metal objects will

become smaller.

Discrimination

The ability of a metal detector to distinguish between different types

of metals and other harmful goods and weapons. Discrimination may

be influenced by several factors including the sensitivity settings,

changes in weather, and more. In addition to discovering dangerous

target objects such as weapons, the proper level of discrimination can

enable screening for other objects of interest as well.

Harmless Alarm

An alarm caused by a person who walks through the WTMD with

harmless objects.

False Alarm

An alarm caused by reasons other than metal objects, such as

electronic interference. An alarm caused by metal objects (harmless or

useful) is not considered a false alarm.

Содержание HZ-WT-ADV-24





























Результаты поиска

Содержание HZ-WT-ADV-24

Отзывы:

Похожие инструкции для HZ-WT-ADV-24

Бренды по названию

Популярные бренды

HZ Security HZ-WT-ADV-24, Руководство пользователя

Результаты поиска

Содержание HZ-WT-ADV-24

Отзывы:

Похожие инструкции для HZ-WT-ADV-24

Бренды по названию

Популярные бренды