Hyundai VK 740, Инструкция по эксплуатации

Страница: 19 / 36

ENG - 19
ENG
Instructions for Use
Before you start:
Before first time use, boil and empty water in the kettle several times. Check bellow mentioned
recommandations for Kettle use:
1) Unwind sufficient cord from the storage area to reach the power outlet. Then place the
power base on a dry, flat surface.
2) Open the lid and fill the kettle with cold water.
3) Make sure that the water level is between the minimum and maximum marks on the water
level scale. Do not switch on the kettle when empty.
4) Close the lid and place the kettle back on the base.
5) Plug to AC outlet with the voltage corresponded to the information on the product label.
Basic operation:
• Press the “ ” key shortly,with the sound, it starts running.
• After the water boils,indicator turns off and the buzzer sends sounds at the same time.
• Advanced operation:
• Press “ ” for 3 seconds,with the buzzer sends out sound, it starts running the function of
heat insulation.The LED light will be shinning with red light, while after the water boils, the
kettle will keep the water temperature for 2 hours with the indicator light shinning. During the 2
hours heat insulation function running, it will go on heating when the temperature arrives
at 85 °C
• Press “ ” for once, you can see the indicator light of 60 °C shines with the green LED light.
It means that it will stop heating when the water temperature is 60 °C.
• Press “ ” for twice, you can see the indicator light of 70 °C shines,with the blue LED light.
It means that it will stop heating when the water temperature is 70 °C.
• Press “ ” for 3 times you can see the indicator light of 80 °C shines,with the yellow LED
light.It means that it will stop heating when the water temperature is 80 °C
• Press “ ” for 4 times we can see the indicator light of 90°C shines,with the purple LED light.
It means that it will stop heating when the water temperature is 90 °C
6) Do not remove the kettle from the power base without first switching off.
7) Remember if you wish to re-boil, switch on the main switch of the kettle .
8) The kettle may be switch off at any time by either pushing the main switch of the kettle.
9) When water boils, the steam passes through the steam channel and then switches off the
kettle. To pour water, lift the kettle from the power base and pour.
10) When pouring out the water incline the kettle slightly and gradually. Do not forget that hot
water is inside.
11) An automatic safety boil-dry cut-out has been fitted for protection against overheating: It will
also operate if the kettle is switched on when containing insufficient water. Always ensure
the water inside the kettle covers the minimum mark on the water level indicator gauge. If
the cut-out has operated, switch the kettle off, disconnect from the power outlet and allow
the kettle to cool down for 5 to 10 minutes. Then refill with enough water and switch on; the
kettle will then boil and cut off as in normal operation.
12) After the use finished please put plug off the power socket.