Hyundai TRC 808 DRUBT3, Инструкция по эксплуатации

Страница: 43 / 68

EN
EN - 43
PLAYING A DISC
1) The playback starts from track 1 automatically when reading the disc.
To pause playback, press button on unit or on remote. The current playing time will flash
on the display.
To resume playback, press button on unit or on remote again.
2) To stop playback, press button on unit or STOP / MO / ST. key on remote, the total number
of tracks.
SELECTING A DESIRED TRACK / PASSAGE
To select a desired track
Press the or button on unit or remote respectively in stop mode or during playing until
the desired track appears on the display. Press the button on unit or on remote to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the or button on unit or on remote to scan the current playing track at high
speed until desired point (passage) appears, then release the button for normal playback mode.
Playback will start again from this point.
To select a song which track number exceeds 10 (for MP3 disc only)
To select a song / track which number exceeds 10, press the FOLD. / 10 / M+ button on unit or
FOLD. / 10 / M UP / DOWN button on the remote control each time to skip forward or backward
10 tracks, then press the skip backwardor skip forward button on unit or on remote
to select desired track. For example: to select the 17th track from the 1st track, press
FOLD. / 10 / MEM+ button on unit or press FOLD. / 10 / M UP key on remote, and then press
the SKIP UP button on unit or on remote six times immediately.
To select a desired folder (for MP3 disc that contains more than one folder)
To select a desired folder during playback, press and hold the FOLD. / 10 / M+ button on unit or
FOLD. / 10 / M UP / DOWN button on the remote control to next / previous folder.
PROGRAMING TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks / MP3
99 tracks can be stored in the memory in any order.
1) In stop mode, press the MEMORY / CLK ADJ. button on unit or press MEMORY key on remote
to enter program setting, the display will flash
MEM
and
P01 001
.
2) Press the button on unit or on remote to select the first desired track to be programmed.
(example: track 2)
3) Press the MEMORY / CLK ADJ. button on unit or press MEMORY key on remote to enter.
The display would flash MEM and P02 002 .
4) Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.
5) Press the button on unit or on remote to start playback from the first programmed track.
The display will show 01 and the “ MEM ” indicator will light up on LCD display.
6) Press the button on unit or STOP / MO / ST. key on remote to stop program playback.
To clear the program, you may:
1) Press button on unit or STOP / MO / ST. key on remote on remote when the disc stopped,
and
2) Open the CD compartment lid, the program will be erased.