Hyundai TRC 808 DRUBT3, Инструкция по эксплуатации

Страница: 40 / 68

EN - 40
LITHIUM BATTERY INSTALLATION OF REMOTE CONTROL
• The remote control includes one CR2025 (3 V) lithium battery.
• To replace the battery, gently push the clasp to the right direction accordingly to
the instruction and then pull out the battery compartment. Take the drained battery
out and install a new lithium battery(CR-2025) in the compartment with the positive
polarity upwarded. Then push the compartment back to its position with a “click”
sound indicating installation finished.
POWER SOURCE
This unit is designed to be operated on AC / DC.
AC OPERATION
Plug the tail of AC power cord into AC socket on unit and the plug into household AC outlet.
The batteries will be automatically disconnected. For dual voltage version, make sure that
the AC VOLTAGE SELECTOR is switched to your local voltage.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 8pcs UM-2/C size batteries (not included)
into compartment. Please follow correct polarities as indicated.
CAUTION:
Remove batteries if they are flat or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly.
BASIC FUNCTION
SETTING THE TIME
Note:
Please make sure that all connections have been ready.
1) In standby mode the LCD display will flash 0:00 . Press the MEMORY / CLK ADJ. button,
the display will show the 12 hours or the 24 hours version. Press SKIP UP / DOWN button
on unit or on remote to choose for the 12 or 24 hour version. Press the MEMORY / CLK ADJ.
button to confirm.
2) After confirm the hours system, the Hour digits will flash, press the or button on unit
or on remote repeatedly to set the clock to the correct Hour, press the MEMORY / CLK ADJ.
button to confirm. Then the minute digits will flash, press the or button on unit on remote
repeatedly to set the clock to the correct Minutes, press the MEMORY / CLK ADJ. button
again to confirm.
WAKING UP THE MUSIC (RADIO / CD/ USB)
You can set the timer to wake up the Radio, CD / MP3 or USB.
1) After setting the time in standby mode, press and hold the TIMER / SLEEP button on unit or
press TIMER / SLEEP key on remote control to set the desired wake up time.
2) Enter the desired hour with the or button, press the TIMER / SLEEP button on unit or
on remote control to confirm. Enter the desired minutes with the or button, press
the TIMER / SLEEP button on unit or on remote control to confirm. Then choose the desired
wake up mode (RADIO / CD / USB) by or button and press TIMER / SLEEP button on
unit or on remote control to confirm.
3) To the pre-set time, the desired wake up mode will turn on automatically.