Hyundai Starex H-1 2004, Руководство пользователя, Страница: 88 / 273

2
INSTRUMENTS AND CONTROLS
23
HEADLIGHT LEVELING
DEVICE SYSTEM
C210A04P-GAT
(If installed)
To adjust the headlight beam level
according to the number of the pas-
sengers and the loading weight in the
cargo, turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight beam
level.
Always keep the headlight beam at the
proper leveling position, or headlights
may dazzle other road users.
Listed chart is the examples of proper
switch settings.
HSRFL210
Do not operate the washer continu-
ously for more than 15 seconds or
when the fluid reservoir is empty; this
could damage the system. Do not op-
erate the wiper when the window is
dry; this can result in scratching as well
as premature wiper blade wear.
For the reason stated above,do not
operate the washer when the washer
fluid reservoir is empty.
NOTE:
o Before operating the wiper in cold
weather, check to be sure that
the wiper blade is not frozen to
the rear window. Attempting to
operate the wiper while the blade
is frozen to the rear window could
cause the motor to burn out.
o If the wiper stops during opera-
tion because of ice or some other
obstruction on the rear window,
the wiper motor could burn out
even if the wiper switch is turned
off. If this occurs, promptly stop
the vehicle, turn off the ignition
switch, and clean the rear win-
dow to allow proper wiper opera-
tion.
o Do not use the wiper when the
rear window is dry; doing so
could scratch the rear window
and wear the blade prematurely.