Hyundai Starex H-1 2004, Руководство пользователя, Страница: 184 / 273

4 4
IN CASE OF EMERGENCY
12
Tightening torque:
Minibus,
Van
Truck
Front
12 to 14 kg.m
(118 to 137 N.m,
87 to 101 lbs.ft)
18 to 22 kg.m
(177 to 216 N.m,
130 to 159 lbs.ft)
Rear
12 to 14 kg.m
(118 to 137 N.m,
87 to 101 lbs.ft)
18 to 22 kg.m
(177 to 216 N.m,
130 to 159 lbs.ft)
E060J01A-AAT
After changing wheels
If you have a tire gauge, remove the
valve cap and check the air pressure.
If the pressure is lower than recom-
mended, drive slowly to the nearest
service station and inflate to the cor-
rect pressure. If it is too high, adjust it
until it is correct. Always reinstall the
valve cap after checking or adjusting
tire pressure. If the cap is not replaced,
air may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
After you have changed wheels, al-
ways secure the flat tire in its place and
return the jack, jack handle, and tools
to their proper storage locations.
HSRFL065
D060I01P-GAT
8. Lower Vehicle and Tighten
Nuts
Lower the car to the ground by moving
the jack handle up and down. Then
position the wrench as shown in the
drawing and tighten the wheel nuts. Be
sure the socket is seated completely
over the nut. Do not stand on the
wrench handle or use an extension
pipe over the wrench handle.
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
HSRFL064