EN - 36
STYLUS REPLACEMENT
To remove the stylus, hold the TONE ARM while pulling down on the top front edge of the plastic
stylus frame, as shown. It may help to use your fingernail. Rotate the front downward and pull the
plastic stylus holder off, as shown.
To replace the stylus, push the back of the plastic stylus holder up against the end of the TONE
ARM at an angle, and then rotate the front of the holder up until it clicks into position, as shown.
NOTE: When removing or (re) installing the stylus, always be careful not to place too much pres
sure on either the stylus holder or the TONE ARM , in order to avoid any possible damage to the
unit.
CARE OF THE CABINETS
You should care for the cabinet as you would care for any piece of fine furniture. When the cabinet
becomes dusty wipe it with a soft, non-abrasive dust cloth. If the cabinet becomes smudged with
finger prints you may use any good quality commercial dusting and polishing spray cleaner, how
ever avoid spraying the plastic or metal parts of this system. We recommend that you spray
the cleaner on your dust cloth, not directly on the cabinet, to avoid getting any of the spray
on the plastic or metal parts.
SPECIFICATION
Power Consumption
19 W
Power Source
AC 230V~60Hz
Speeds
33-1/3, 45, 78rpm
Dimensions(W x D x H)
42.7 x 35 x 15.2cm(approx.)
Weight
5,2Kgs(approx.)
Line Output
500mV (nominal)
Содержание RT409
Страница 38: ...Poznámky Notes Notatky ...
Страница 39: ...Poznámky Notes Notatky ...
Страница 40: ...Seoul Korea ...
