Hyundai RT409, Руководство пользователя

Страница: 32 / 40

EN - 32
● Remove the twist-tie that was used to secure the tone arm during shipment.
● lease the tone arm lock lever.
● Connect the plug to your AC outlet.
POWER SOURCE
This system is designed to operate on normal 220V 50 Hz AC only.Attempting to operate from any
other power source may cause damage to the system, and such damage is not covered by your
warranty.
NOTE: You will note that this system is equipped with domestic standard AC power plug If this
plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the
wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have
an outdated non-polarized AC outlet. You should have your outlet changed by a qualified licensed
electrician.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber ‚feet‘ to prevent the product from moving when you
operate the controls. These ‚feet‘ are made from nonmigrating rubber material specially formulated
to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber ‚feet‘ to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware stores and
home improvement centers everywhere, and apply these pads to the bottom of the rubber ‚feet‘
before you place the product on fine wooden furniture.
IMPORTANT: Raising And Lowering The Lid
To open the lid, raise it as far as it will go until the lid support bracket locks in the open position.
To close the lid, lift it upward slightly until the lid support bracket unlocks , and then gently lower
the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.