Hyundai RT190SURIP, Инструкция по эксплуатации

Страница: 34 / 52

EN - 34
Remark
- The system can detect and read the fi le under MP3 format only though the USB port or SD
Card slot.
- If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding
format, some MP3 player may not be able to play via the USB socket. This is not a
malfunction of the system.
MP3 track format requirement:-
- MP3 bit rate : 32 KBPS~256 KBPS.
● Repeat/random mode
Press the Repeat/Random Button (7) before or during playback, a single track or all the tracks
can be played in different mode ass follow :
REP/RAN
LED
INDICATOR
PLAY MODE STATUS
REPEAT SINGLE TRACK FLASH IN RED COLOR
REPEAT ALL TRACKS LIGHT UP IN RED COLOR
RANDOM MODE LIGHT UP IN GREEN COLOR
OFF MODE -----------------
● Repeat play
You can listen the desired track, or all tracks repeatedly by this function.
● Random play
You can listen all the tracks in a random order by this function.
ENCODING OF PHONO INTO MP3 FILE
The system is able to encode the Phono to MP3 format and recording at memory media with
USB connecting port or SD/MMC Card (support maximum up to 2GB memory size).
A) Phono encoding
1) Set the Function knob (5) to “Phono/Aux” made and then press “ Rec” Button(8).
2) The Record LED indicator (12) will light up. Now the system was ready to encoding.
3) Start playback at Phono of the track which you want to recording to USB or SD.
4) After
fi nish of recording, press the “ Rec“ Button (8) again during recording mode.
REMARK:-
- The recording speed is 1:1 and according to the actual playing time of the record.
- The system will create a “AUDIO” folder and then store the encoding track in it.
- The recording format is preset at – MP3 bit rate : 128 KBPS, sampling rate : 44.1kHz.
- To interrupt the recording, press the “ Rec “ Button(8)again during recording mode.
- Please do not insert USB key and SD card at the same time, it may confuse the playing
mode or the encoding mode.
B) Aux encoding
1) Connect the unit to other device by connecting the Aux in jack (24)
2) Set the Function knob (5) to “Phono/Aux” made and then press “ Rec” Button(8).
3) The Record LED indicator (12) will light up. Now the system was ready to encoding.
4) Start playback your external device to recording to USB or SD.
5) After
fi nish of recording, press the “ Rec“ Button(8)again during recording mode.