EN - 28
DAB SETTINGS
Note: You can only see the DAB settings when you have selected ‘DAB’ as the radio source.
Full scan
You can use the ‘Full Scan’ (auto tune) function to automatically scan for new digital radio stations
and remove inactive ones. To carry out an auto tune:
Press the hold SELECT/ENTER button. The number of stations found will be displayed during the
auto tune. When the auto tune has finished, the last station that you were listening to. If the last stati
-
on you were listening to is no longer available, will tune into the first station in the alphabetical list.
Manual tuning
To manually check the signal strength of a known channel:
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT dial to choose ‘Manual tune’.
•
Turn and press the SELECT dial to choose the channel.
DRC- Dynamic range control
Dynamic Range Control (DRC) is used to make quieter sounds in a digital radio broadcast easier
to hear at low volume or in a noisy environment. Check with the broadcasters to find out if they use
DRC.
To change the DRC settings:
Press and hold the MENU button to view the main menu. Turn and press the SELECT dial to choose
‘DRC’. Turn and press the SELECT dial to choose between one of the following options:
•
DRC high: Applies maximum compression to the DRC level.
•
DRC low: Applies reduced compression to the DRC level.
•
DRC off: Removes DRC compression.
FM RADIO SETTINGS
Note: You can only see the FM radio settings when you have selected ‘FM’ as the radio source.
FM scan
You can choose whether automatically stops at the next available FM station or the next available FM
station with a strong signal when scanning for an FM station. To change the FM scan setting:
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT dial to choose ‘Scan Setting’.
•
Select between ‘Strong Stations Only’ or ‘All Stations’
USING THE AUX INPUT
You can use the aux input play any music from your phone or tablet. Connect the line out or head
-
phone socket of your auxiliary device to the Aux In socket using a suitable cable.
Selecting the Aux input: Press the SOURCE button to select “AUX“. On your auxiliary device, start to
play the content that you selected on your auxiliary device.
